5.6
Connection/Disconnection of Extension Cable
This section describes the connection/disconnection procedure of an extension cable.
MELSEC iQ-R series extension cable
Connection procedure
(1)
(3)
Removal procedure
To disconnect the extension cable, hold the connector part with pushing two lock buttons on the connector.
(2)
1.
Remove the extension connector protective
cover (2) from the extension connector cover
(1) before the extension cable is connected to
the base unit.
2.
Insert the connector (3) of the extension cable
with the triangle mark at the left side to the
connector of the base unit. Lock the connector
securely until it clicks.
5 INSTALLATION AND WIRING
5.6 Connection/Disconnection of Extension Cable
5
119