Hitachi Compute Blade 500 Series Web Console Users Manual page 84

System settings
LP CLI
Virtual COM
console port
2-74
Item
Logical partitioning
IP address
Subnet mask
Default gateway
LP ID
VNIC system No.
Date and
time
Authentication
CLI IP address 1-8
Connection mode
Telnet
authentication
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Displays operation mode of the server blade.
Displays the LP IP address.
Displays the subnet mask.
Displays the default gateway.
Displays the LP ID.
Displays the VNIC system number.
Time Displays the time zone.
zone
Sync Displays the server with which the time is
synchronized.
1
NTP
NTP: The time is synchronized with the NTP
server.
SVP: The time is synchronized with the
management module.
OFF: The time is not synchronized.
NTP Displays the server from which the NTP setting
1 is imported.
import
SVP: The NTP setting of the management
module has been imported.
BMC: The NTP setting of BMC has been
imported.
NONE: The NTP setting is not imported.
NTP Displays the IP address of the NTP server with
server1, which the time is synchronized.
NTP
Note that this setting is valid only if "NTP" is
1
server2
set for "NTP synchronization".
Displays the user authentication setting for LP
1
CLI.
Enable: User authentication is required when
connecting by using the HvmSh command.
Disable: User authentication is not required
when connecting by using the HvmSh
command.
Displays details of the CLI IP address settings.
1 Displays virtual COM connection mode (Telnet
or SSH).
Displays the user authentication settings for a
Telnet connection.
1
Enable: User authentication is required when
connecting via Telnet.
Disable: User authentication is not required
when connecting via Telnet.
Note that user authentication is required when
connecting by using SSH.
Description