Hitachi Compute Blade 500 Series Web Console Users Manual page 17

Tree configuration
Management Modules
Fan Modules
Power Supply Modules
Systems
Network management
7
WWN management
MAC management
Hitachi Compute Blade 500 Series Web Console User's Guide
Management
5
Module 0 – 1
Power Supply
6
Module 0 – 3
8 Management
LAN
Maintenance
LAN
Internal LAN
Link Fault
Tolerance
Operating the Web Console
Description
module, and operates the switch
module.
Sets basic configuration of Hitachi
1 Gb LAN switch module (20-port,
40-port) and Hitachi 1 Gb/10 Gb
LAN switch module; starts the
Web console window of Brocade 8
Gb fibre channel switch module
and 16 Gb fibre channel switch
module.
Shows the operation status and
hardware information of a
specified management module,
and operates the management
module.
Shows the operation status of fan
modules.
Shows the operation state and
hardware information of a
specified power supply module.
Controls the management LAN
interface of server blades (BMC),
switch modules, management
modules.
Setting an IP address, subnet
mask, gateway, and DNS is
available. You can also set up IPv6
addresses, prefixes, gateways,
and DNS servers.
Shows the maintenance LAN
interface of a management
module; cannot change settings.
Sets a network used inside the
system unit.
Enables/disables the link fault
tolerance, and sets time for
monitoring.
Shows and sets WWN, including
the Default Physical WWN unique
to hardware, an Optional Physical
WWN, and virtual WWN, used by a
mezzanine card installed in a
server blade.
Shows and sets the MAC address,
including the Default Physical MAC
address unique to hardware, an
Optional Physical MAC address,
and virtual MAC address, used by
a mezzanine card installed in a
server blade.
2-7