Hitachi Compute Blade 500 Series Web Console Users Manual page 120

VNIC MAC address
Virtual NIC Number
Slot
Port
Segment
Port Assignment
panel
2-110
Table 2-120 Items in Set NIC port
Item
Assign check box Selects an NIC port to assign to the LPAR.
1
Slot
Port
Controller
number
Scheduling mode [Management module firmware version
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Shows segments selected in the port
assignment panel and the MAC address
assigned to the virtual NIC number.
Shows virtual NIC numbers selected in the
port assignment panel.
Shows locations of cards with the segment
port selected in the Port Assignment.
Shows locations of segment ports selected in
the Port Assignment
Shows segments selected in the Port
Assignment.
Shows a NIC slot on the server blade.
[Management module firmware version
A0205 or later]
Shows also the number of a server blade
with the slot.
Shows a NIC port on the server blade.
[Management module firmware version
A0240 or later]
Shows a NIC controller number on the
server blade.
A0240 or later]
Shows a NIC scheduling mode on the
server blade.