Hitachi Compute Blade 500 Series Web Console Users Manual page 62

Port number
TLS
version
Item
Use
Banner message Specify a banner message for the login banner. The banner message
Item
Use
Port number Type the port number to accept connection requests from SSH clients.
Item
Asset Tag Asset tag for user to define. Up to 63 alphanumeric characters and symbols
TLS version
(Available only
with CB 520H B2)
2-52
Item
Type the port number to accept connection requests from WS-
Management clients. Specify a number between 1024 and 65535
for port number.
Leave this number same as the default if you don't use SMASH.
TLSv1.0 Select Disable or Enable. TLSv1.0 and TLSv1.1 can be enabled
even if Security strength is set to High so that clients that does not
TLSv1.1
support TLSv1.2 can be used.
TLSv1.2
Table 2-51 Login banner items
Select Disable or Enable.
If a Login banner is enabled, a banner message is displayed on the
server blade Web console and SMASH (CLP) before login.
must be an ASCII string up to 100 lines and 1600 characters.
Table 2-52 SMASH (CLP) items
Select Disable or Enable. With this item disabled, BMC will reject
connection requests from SSH clients.
Specify a number between 1024 and 65535 for port number.
Leave this number same as the default if you don't use SMASH.
Table 2-53 Asset Information items
can be used.
Table 2-54 TLS version items
Item
SSLv3 Select Disable or Enable.
If an SSL/TLS version is disabled, the server blade Web
TLSv1.0
console and remote console using that version cannot be
TLSv1.1 connected.
When security strength is set to high, only TLSv1.2 is
TLSv1.2
enabled while other versions are fixed: Disable.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Description
Description
Description