Hitachi Compute Blade 500 Series Web Console Users Manual page 161

Maintenance LAN tab
Port
Link Fault Tolerance
Link Down Time
(sec)
Link Up time (sec)
WWN management
This window shows WWNs: WWN (Default Physical WWN) unique to
hardware; Optional Physical WWN; Virtual WWN used by a mezzanine card
installed in a server blade. You can set them on the window.
Table 2-173 Maintenance LAN items
Item
Shows that this is the maintenance LAN port.
Shows the link fault tolerance is set to Enable or Disable.
When the active management module is linked down for the
specified time (sec), ports will be switched.
When the active management module is linked up for the
specified time (sec), the port will be restored to the management
module.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
2-151