Hitachi Compute Blade 500 Series Web Console Users Manual page 65

Item
Group Authentication
authentication method
settings
Group DN1
Group DN1 role
(Available only with
CB 520X and
CB520H B2 LDAP Ph.
2 or later)
Group DN2
Group DN2 role
(Available only with
CB 520X and
CB520H B2 LDAP Ph.
2 or later)
Group DN3
Group DN3 role
(Available only with
CB 520X and
CB520H B2 LDAP Ph.
2 or later)
Group DN4
Group DN4 role
(Available only with
CB 520X and
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Select one of the following group authentication
methods.
• Disable group authentication: BMC does not
perform authentication based on groups
defined in LDAP server.
• Static group: BMC performs authentication
based on the groups specified by Group
DN1-5.
• Dynamic group: BMC performs
authentication based on the search DN
input by the user and search filter as a
temporary group.
Specify a DN of group entry. This item is used
when Authentication method is Static group. If
the user is not a member of any group specified
by Group DN1-5, user authentication fails and
the user is not allowed to log in to BMC
services.
Specify a role of group entry. This item is used
for Static group. If a user is not a member of
any groups specified in Group DN 1 to 5, a
group role specified here will not be assigned to
the user. You can select a group role from the
following 4 roles.
None: No group role is assigned.
Use the role of user entry: Group role is not
used. User entry role specified in role attribute,
Directory search settings is used.
Administrator: Members of the group can use
each service of server blade BMC.
SMASH: Members of the group can use SMASH-
CLP and WS-Management of server blade BMC.
Ditto as Group DN1.
Ditto as Group DN1 role.
2-55