Hitachi Compute Blade 500 Series Web Console Users Manual page 141

Item
Restore Settings Restore the management module configuration using the backed up
file.
Sync Internal Synchronizes the internal network setting of the standby management
LAN module with that of the active one after changing management
modules in maintenance. The standby management module will
restart after this operation.
Perform this only after changing standby management modules. No
need to operate this in usual operation.
This item is not shown when a single management module is installed.
Copy FRU Synchronizes the device information of the standby management
module with that of the active one after changing management
modules in maintenance.
Perform this only after changing standby management modules. No
need to operate this in usual operation.
This item is not shown when a single management module is installed.
Switch Switches management modules between the active and standby. This
Management operation disconnects the Web console. Then, you need to log in
Module again.
This item is not shown when a single management module is installed.
Restart Restarts both active and standby management modules. If a server
blade is powered on, restarting is not available. This operation
disconnects the Web console. Then. re-login is required to proceed the
operation. Re-log in to the Web console after restarting is completed.
Shutdown Shuts down both management modules, the active and standby. If a
server blade is powered on, shutdown is not available. This operation
disconnects the Web console.
Management modules information
Table 2-147 Management modules information items
Item
Management Shows the number of a management module.
module
Power Shows a power state among the following states:
ON: Powered on.
OFF: Powered off.
-----: No management module is installed.
Status Shows an operation state of the management module among the
following states.
Normal: In normal state.
Booting: In initialization state.
Shutting down: In shutdown state.
Hitachi Compute Blade 500 Series Web Console User's Guide
Operating the Web Console
Description
Description
2-131