Hitachi Compute Blade 500 Series Web Console Users Manual page 110

case, when the Assign firmware to Server Blade (Confirming) dialog box
is shown again, the result will be "Unexecuted".
• Change LP model
Server Blade No.
LP model
License key:
direct input
License key:
key file
Confirm
Cancel
Note: In SMP configuration, change LP model of all server blades in the
configuration.
• Check result of license key
2-100
Table 2-106 Change LP model items
Item
radio
button
text box
radio
button
Browse
button
Table 2-107 Action button at the bottom
Item
Shows the Check result of key dialog box.
Cancels settings and close the Change LP model dialog box.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Selects a server blade to change its LPAR manager
model.
Shows the current license model.
Essential: Can activate up to 4 LPARs; can define up to
4 processor groups, at the same time.
Advanced: Can activate up to 30 LPARs; can define up
to 30 processor groups, at the same time.
Selects the method to directly type the license key.
Type the license key. This box is available only with
License key direct input radio button selected.
Selects a key file from which the license key is read.
This item is available only with License key file radio
button selected.
Selects a key file for the license key. This button is
available only when the key file radio button is
selected.
Description