Hitachi Compute Blade 500 Series Web Console Users Manual page 143

Management module N summary
Table 2-149 Action combo box on the upper right
Item
Maintenance Sets the management module slot currently shown in maintenance
mode ON mode. Maintenance mode is set for a management module slot. If the
slot has a management module, the management module is also set in
maintenance mode. The mode will be automatically cancelled in about
two hours after the mode is set.
Maintenance Release the management module slot currently shown from
mode OFF maintenance mode. Release of maintenance mode is done for a
management module slot. If the slot has a management module, the
management module is also released from maintenance mode.
Clear Boot Cancels the standby Boot Disable. This operation restarts the standby
Disable module. The redundant configuration is created after the restarting is
completed. Perform this only after changing standby management
modules. No need to operate this in usual operation.
Restart Restarts the management module currently shown. Restarting the
active management module disconnects the Web console. Then. re-
login is required for the operation.
Shutdown Shuts down the management module currently shown. Shutting down
the active management module disconnects the Web console. Then.
re-login is required for operation.
Hitachi Compute Blade 500 Series Web Console User's Guide
Operating the Web Console
Description
2-133