NEC Univerge SV8100 System Hardware Manual page 79

Repeat for additional chassis mounting.
4. Carefully slide the chassis into desired location in the rack. Make sure the
5. Secure the brackets to the rack using the screws supplied.
3-20
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 3-23 Rack Mount Bracket Installed 19"CHS2U
hooks on the mounting bracket are inserted into the back of the chassis,
securing it in place. Note that the cabling is run through the front of the rack for
ease of access.
Each CHS2U chassis will require approximately 3.5" of
height within the rack.
Repeat for additional chassis mounting.
Figure 3-24 Rack Mount 19"CHS2U
http//vietpro.com.vn
UNIVERGE SV8100
Installing the SV8100 Chassis