NEC Univerge SV8100 System Hardware Manual page 378

UNIVERGE SV8100
10.5.2
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 6-46 Install Plastic Panels
25. Connect the line cord to the adapter.
26. Connect the user system (KTS or PBX) cable.
27. If required, remove the side panel from the original cradle unit.
Using the PSA-L Adapter
CAUTION: Before installing or removing the PSA-L
adapter, remove the line cord, LAN cable, and then AC
adapter from the outlet.
1. Placing Calls:
When the PSTN line is activated either manually by the switch or due
to a power failure, use the dial pad buttons (0-9, *, #) to place an
outside call. Use the Vol. Up or Down to increase or decrease audio
levels.

Other than receiving calls, no other multiline terminal function is
available.
2. Answering Calls:

If you receive a call via PSTN during a conversation via LAN,
answer the call by completing the LAN call and placing the
handset back into the cradle. Change the LAN/PSTN Change
Switch to PSTN and then lift the handset to answer the call. If you
change the LAN/PSTN Change Switch to the PSTN position while
talking via LAN, the LAN call is disconnected.

Other than receiving calls, no other terminal function is available.
http//vietpro.com.vn
6-51