NEC Univerge SV8100 System Hardware Manual page 212

UNIVERGE SV8100
6.2.2
6.2.3
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Installation
To install the CD-PVAA:
♦ Install CompactFlash into CD-PVAA
♦ Plug the into any universal slot on the chassis
♦ Refer to Program 10-55-01 to configure the IP Address of the
CD-PVAA
♦ Refer to Program 10-55-04 to configure the Subnet Mask of the
CD-PVAA
♦ Refer to Program 10-55-05 to configure the Gateway of the CD-PVAA
♦ The CD-PVAA blade is hot swappable and can be removed from the
chassis without powering down the blade or the SV8100 system
♦ When the SV8100 requires system reset, this blade comes back on
line
Switch Settings
The CD-PVAA blade has the following switches:
Reset Switch SW3
This switch allows the technician to reset the CD-PVAA without having to
remove and reinsert the blade into the chassis.
http//vietpro.com.vn
4-95