NEC Univerge SV8100 System Hardware Manual page 118

UNIVERGE SV8100
Chapter4; Installing the SV8100 Blades
SECTION 1 GENERAL INFORMATION
This chapter contains information to help the technician install the blades for the
UNIVERGE SV8100 system. The technician should be familiar with this section
before installing any equipment.
1.1 Slot Locations
Each CHS2U has six slots. In the Controlling Chassis, the CD-CP00 must be
installed in the first slot (slot 1)
Slot Locations in the Controlling Chassis:
Slot Locating in the Expansion Chassis:
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Slot 1 – dedicated for the CPU
Slots 2~6 – are universal
Slots 1~6 are universal. (i.e., any type of blade can be installed in these slots).
http//vietpro.com.vn
4-1