NEC Univerge SV8100 System Hardware Manual page 216

UNIVERGE SV8100
6.3.2
6.3.3
CN2, CN3
LINK/ACT
CN2, CN3
10/100
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Installation
To install the CD-RTB:
1. Plug the CD-RTB blade in any universal slot.
2. Refer to the UNIVERGE SV8100 Programming Manual for required
programming.
LED Indications
LED indications for the CD-RTB are indicated in
Indications. Each LED is listed with its associated function and LED and
Operational status. Refer to
the location of the LEDs on the blade.
Table 4-54 CD-RTB LED Indications
LED Function
LAN
Operation
Status
LAN
Speed
Status
Figure 4-39 CD-RTB Blade on page 4-96
Operation
LED Status
Status
Green On Link Established
Green Communicating
Flashing Data
Green Off Not Activated
Orange On 100Mbps
Orange Off 10Mbps
http//vietpro.com.vn
Table 4-54 CD-RTB LED
Comments
Individually for
Ports 1~8
Individually for
Ports 1~8
Individually for
Ports 1~8
Individually for
Ports 1~8
Individually for
Ports 1~8
4-99
for