I Nstallation - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
IPLA
PZ-32IPLA
PZ-64IPLA
PZ-128IPLA
3.4.2
3.4.3
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Table 4-15 IPLA Maximum Upgrade Capacities
capacities for the IPLA daughter board when they are upgraded.
Table 4-15 IPLA Maximum Upgrade Capacities
19" Chassis
with CPU
1
1
1
When installing an IPLA daughter board, the system allocates the
maximum number of trunk ports for the blade being installed.
This daughter board is installed on the CD-CP00.
Installation
To install a PZ-32IPLA/PZ-64IPLA/PZ-128IPLA on the CD-CP00:
Do not remove or install the CD-CP00 with the power on.
1. With the system power off, remove the CD-CP00.
2. Install the IPLA daughter board onto the CD-CP00 blade.
3. Insert the CD-CP00 into slot 1 in the Controlling Chassis.
Refer to Figure 3-25 19" Controlling Chassis – Guides Slot 1 on page
3-22 for more details.
4. Connect the IPLA daughter board to the CD-RTB, CD-ETIA or to an
external switching hub using an Ethernet cable.
5. Refer to the UNIVERGE SV8100 Programming Manual for detailed
programming instructions.
Switch Settings
These daughter boards do not have any switches that need to be set and
do not require any hardware setting.
19" Chassis 19" Chassis
without CPU
0
0
0
http//vietpro.com.vn
provides the maximum
Networked
x4 Chassis
1 16
1 16
1 16
4-31