NEC Univerge SV8100 System Hardware Manual page 266

UNIVERGE SV8100
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
4.8.3 Configuring the Digital Telephone for the Ten Key Kit
1. With the telephone not plugged in and the handset on-hook,
press the 4 and 6 butt
the telephone cable.
This places the telephone into Service Class Read/Wright mode. The
Message Waiting LED should be On.
2. Press 2 on the numbered keypad to en
The Message Waiting LED should flash.
3. Follow the directions below for the type of keypad installed:
Ten Key Kit T ype
Japanese Value
Model A Telephone
Model B UX5000 Telephone
Call Center
Hotel-1
Hotel-2
Retirement Home
Japan 32-Button
Japan Eco
Model A Eco
Model B Eco
Reserve
4. Press line key 2, 8, 14 20 to save to memory. The display
changes back to the Service Class
Message Waiting (MW) LED is ON.
5. Press Exit to return the telephone to the idle condition.
4.8.4 Configuring the IP Telephone for the Numbered Keypad
1. Enter the termina
TRANSFER , *, #.
ons on the numbered keypad and connect
Table 5-9 Ten Key Kit Type
Push
01
02
03
04
05
06
07
08
09
10
11
12
l's program mode by pressing HOLD,
http//vietpro.com.vn
ter the Button Kit mode.
LED Indica tion
Line 1 LED on Red
Line 2 LED on Red
Line 1 and 2 LED on R
Line 1 LED on Green
Line 2 LED on Green
Line 1 and 2 LED on Green
Line 1 LED flashing Red
Line 2 LED flashing Red
Line 1 and 2 LED flashing Red
Line 1 LED flashing Green
Line 2 LED flashing Green
Line 1 and 2 LED flashing Green
R/W mode and the Red
ed
5-41