NEC Univerge SV8100 System Hardware Manual page 349

7.3 Programming
 10-03-01: ETU Setup. Terminal Type (Circuit 1)
10-03-06: ETU Setup. Terminal Type (Circuit 2)
Confirm that the IP1WW-2PGDAD has defined the circuit as either type 7 for
External Ringer or 9 for ACIs. (If the IP1WW-2PGDAD circuit was previously
been defined for another type of circuit, unplug the IP1WW-2PGDAD and plug it
back in to reset the circuit type.)
 10-05-01 : General Purpose Relay Setup
Define which relay circuits (5-8) on the IP1WW-2PGDAD are used for General
Purpose Relays.
 11-06-01 : ACI Extension Numbering
Assign extension numbers to ACI software ports. Select a number outside of the
normal extension number range.
ACI Ports 01-96
6-22
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 6-15 IP1WW-2PGDAD Cable Connection
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100