NEC Univerge SV8100 System Hardware Manual page 367

10.4.1
10.4.2
6-40
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
APR-L UNIT Switch Settings
Figure 6-29 APR-L UNIT
Switches (DSW) allow a technician to configure the unit for specific
settings.
Due to location, set the switches prior to installation of
APR-L on DTL multiline terminal.
Set the DIP Switches on the APR adapter to the required position.
Installing the APR-L UNIT
Perform the following to connect the APR-L UNIT to the Bottom Option
Interface located underneath the DTL multiline terminal.
Only one APR-L UNIT can be installed.
To prevent possible damage to the APR-L UNIT or the
DTL multiline terminal during installation or removal,
disconnect the line cord/LAN cable and the AC/DC
adapter from the DTL multiline terminal.
1. Unplug the line cord from the multiline terminal.
2. Turn the DTL multiline terminal upside down.
shows the location of the switches. The DIP
Figure 6-29 APR-L UNIT
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100