NEC Univerge SV8100 System Hardware Manual page 358

UNIVERGE SV8100
When using center feed, set the SW1 switch located on the back of the adapter as
follows:
10.2.2
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 210/24 Switch (US Only)
Installation
1. Set the SW1 switch on the ILPA-R adapter to the correct setting for the
ethernet switch to which it is to be connected.
IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 210/24 Switch (US Only)
2. Set the switch setting on the NEC IP Phone or IP adapter to the correct
position.
IP Phone (SW2) or IP Adapter (SW1)
NEC Power Patch Panel
(12 port NEC SN1604 PWRMS, 24 port NEC
BlueFire 210/24) (US Only)
8SHUBU Blade
Cisco Catalyst Power Patch Panel
Cisco Catalyst PRW Series
Figure 6-21 In-Line Power Adapter Switch Settings
Center Feed Hub System
Center Feed Hub System
http//vietpro.com.vn
SW1 Setting
1
1
2
SW1 Setting
1
1
2
SW Setting
1
2
6-31