Mitsubishi Electric GOT2000 Series Connection Manual page 405

17.3.2 Setting communication interface (Controller Setting)
■1. When using the Ethernet connection cable
For using the VNC server, Ethernet
communication drivers must be set on the GOT,
and set the Communication settings
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set Manufacturer, Controller Type, I/F, and Driver according to the connected equipment to be used.
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
■2. When using the wireless LAN
For details of the wireless LAN setting, refer to the following.
➠ 22. WIRELESS LAN CONNECTION
17.4 Setting in Personal Computer
For connecting the VNC server to the personal computer (VNC client), it is necessary to install the VNC client software to
the personal computer to be connected and set it.
Refer to the following for details of the VNC client software installation method and setting method.
➠
GT Designer3 (GOT2000) Screen Design Manual
2.
[Controller Setting] from the menu.
3.
4.
Click!
17.4 Setting in Personal Computer
17
17 - 5