Serial Connection - Mitsubishi Electric GOT2000 Series Connection Manual

15.2 Serial Connection

15.2.1 System Configuration
PC
Personal computer
GT01-C30R2-9S
To be selected by the
user.
Personal computer
GT15-C50VG
To be selected by the
user.
Analog RGB connection
*1 The cable length differs depending on the specification of the personal computer to be used. Use the cable that is compatible
with the personal computer to be used.
*2 The connection cable 1) (RS-232 cable) and the connection cable 2) (analog cable) should be connected between the personal
computer and the GOT.
*3 GT2705-V is not supported.
*4 The unit installation position, and the number of units, refer to the following.
➠
Connection cable 1)
Connection cable 2)
*2
Connection cable 1)
Max.
Cable model
distance
or
15m
RS232 connection
diagram 1)
*2
Connection cable 1)
Max.
Cable model
distance
or
*1
diagram 1)
1.3.6 Installing a unit on another unit (Checking the unit installation position)
POINT POINT POINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
➠
Mitsubishi Products
➠
Non-Mitsubishi Products 1, Non-Mitsubishi Products 2
➠
Microcomputer, MODBUS Products, Peripherals
Extended function OS Extended function OS
PC remote operation
Video/RGB input
(serial)
GOT
Varies according to the
connection type.
GOT
Option device Model
- (Built into GOT)
*3
GT15-RS2-9P
*3
GOT
Option device Model
GT27-R2-Z
*3
GT27-V4R1-Z
*3
15.2 Serial Connection
Communication driver
Connection type
dependent
PLC
Number of
PLC connectable
equipment
For the system
1 personal
configuration between
computer for 1
the GOT and PLC,
GOT
refer to each chapter.
Number of
PLC connectable
equipment
For the system
1 personal
configuration between
computer for 1
the GOT and PLC,
GOT
refer to each chapter.
15
15 - 3