Got Wireless Lan I/F Setting - Mitsubishi Electric GOT2000 Series Connection Manual

22.2.3 Communication detail settings
Make the settings according to the usage environment.
Item
GOT Net No.
GOT Station
GOT wireless LAN Setting
22.2.4

GOT Wireless LAN I/F Setting

Set [GOT IP Address], [Subnet Mask], [Peripheral S/W Communication Port No], and [Transparent Port No.] for the wireless
LAN interface.
For the detailed settings, refer to the following.
➠
22.3 Precautions
■1. When connecting to multiple GOTs
Do not use the IP address "192.168.0.18" when using multiple GOTs with the GOT 1000 series mixed.
A communication error may occur on the GOT with the IP address.
■2. When setting IP address
Do not use "0" and "255" at the end of an IP address.
(Numbers of *.*.*.0 and *.*.*.255 are used by the system)
The GOT may not monitor the controller correctly with the above numbers.
Consult with the administrator of the network before setting an IP address to the GOT and controller.
22 - 4
22.3 Precautions
Set the network No. of the GOT.
(Default: 1)
Set the station No. of the GOT.
(Default: 1)
Displays the set GOT IP address in the [GOT Wireless LAN I/F Setting] dialog.
➠
22.2.4 GOT Wireless LAN I/F Setting
POINT POINT POINT
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's [Communication
Settings] after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠ GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
1.1.2 GOT Ethernet Setting
Description Range
1 to 239
1 to 64
-