Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

9.7

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Set the device name, device number, and bit number.
Device
The bit number can be set only when specifying the bit of word device.
Information Displays the device type and setting range which are selected in [Device].
Device name
Input relay (PI)
Bit device
Output relay (PQ)
Input relay (PIW)
Word
device
Output relay (PQW)
PI0000 to PI2437
PQ0000 to PQ2437
PIW0 to PIW242
PQW0 to PQW242
POINT POINT POINT
PROFIBUS DP master equipment Device Settings
(1) When setting a bit device
Use the byte address (decimal) and bit address (octal).
(2) When setting a word device
Use the byte address (decimal).
Description
Setting range
Device number
Bit address (octal)
Byte address (decimal)
Device name
Device number
Byte address (decimal)
(Use an even number.)
Device name
("W" is added.)
9.7 Device Range that Can Be Set
Device No. representation
Decimal + Octal
Decimal
9 - 9
9