User Interface
4.1.2 Setting Keypad Display Values
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24 V DC supply.
The information displayed on the keypad can be
customised for user application.
•
Each display readout has a parameter associated
with it.
•
Options are selected in the menu Keypad Set-up.
•
Display 2 has an alternate larger display option.
•
The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable.
Display
Parameter number
1.1
K-20
1.2
K-21
1.3
K-22
2
K-23
3
K-24
Illustration 4.2 Display Readouts
MG35M402
AF-650 GP™ Design and Installation Guide
4.1.3 Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key
Status
Default setting
Reference %
Quick Menu
Motor current
Power [kW]
Frequency
kWh counter
Main Menu
Alarm Log
DET-767c All rights reserved.
Illustration 4.3 Menu Keys
Function
Shows operational information.
•
In Auto mode, press to toggle between
status readout displays.
•
Press repeatedly to scroll through each
status display.
•
Press [Status] plus [
display brightness.
•
The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Allows access to programming parameters for
initial set-up instructions and many detailed
application instructions.
•
Press to access Quick Start for sequenced
instructions to program the basic frequency
controller set-up.
•
Follow the sequence of parameters as
presented for the function set-up.
Allows access to all programming parameters.
•
Press twice to access top-level index.
•
Press once to return to the last location
accessed.
•
Press to enter a parameter number for direct
access to that parameter.
Displays a list of current warnings, the last 10
alarms, and the maintenance log.
•
For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
Table 4.1 Function Description Menu Keys
▲
▼
] or [
] to adjust the
35
4
4