GE AF-650 GP Design And Installation Manual page 122

Specifications
AF-650 GP
Heavy duty/Ligth duty*
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [hp]
Typical shaft ouptut at 500 V [kW]
Enclosure IP20
Enclosure IP21, IP54
Output current
Continuous (at 400 V) [A]
Intermittent (60 s overload)
(at 400 V)[A]
Continuous (at 460/500 V) [A]
Intermittent (60 s overload)
(at 460/500 V) [kVA]
Continuous kVA (at 400 V) [kVA]
Continuous kVA (at 460 V) [kVA]
Continuous kVA (at 500 V) [kVA]
Maximum input current
Continuous (at 400 V) [A]
Continuous (at 460/500 V) [A]
Max. cable size: mains, motor, brake
2 1)2)
and load share [mm (AWG)]
3)
Max. external mains fuses [A]
Estimated power loss at 400 V [W]
Estimated power loss at 460 V [W]
Weight, enclosure IP20, IP21, IP54 [kg/
6)
(lb)]
5)
Efficiency
Output frequency
Heatsink overtemp trip [° C/(° F)]
Control card ambient trip [° C/(° F)]
*High overload=150% current for 60 s, Normal overload=110% current for 60 s
Table 13.7 Technical Specifications, Unit Size 4xh 380–500 V
1) American Wire Gauge.
2) Wiring terminals on N132, N160, and N315 frequency converters cannot receive cables one size larger.
3) For fuse ratings, see chapter 13.3 Fuse Specifications.
4) Typical power loss is at normal conditions and expected to be within
values are based on a typical motor efficiency (IE/IE3 border line). Lower efficiency motors add to the power loss in the frequency converter.
Applies for dimensioning of frequency converter cooling. If the switching frequency is higher than the default setting, the power losses may
increase. Keypad and typical control card power consumptions are included. Options and customer load can add up to 30 W to the losses, though
usually a fully loaded control card and options for slots A and B each add only 4 W.
5) Measured using 5 m (16.4 ft) screened motor cables at rated load and rated frequency.
Efficiency measured at nominal current. For energy efficiency class, see chapter 13.2 General Technical DataEnvironment.
6) Additional frame size weights are as follows: 45h - 166 (255) / 46h - 129 (285) / 47h - 200 (440) / 48h - 225 (496). Weights are in kg (lbs).
MG35M402
AF-650 GP™ Design and Installation Guide
125 hp 150 hp
HD LD HD
90 110 110
125 150 150
110 132 132
43h 43h
41h 41h
177 212 212
266 233 318
160 190 190
240 209 285
123 147 147
127 151 151
139 165 165
171 204 204
154 183 183
2x95 (2x3/0)
315 350
4) 5)
2031 2559 2289 2954
4) 5) 1828 2261 2051 2724
62 (135)
75 (167)
DET-767c All rights reserved.
175 hp 250 hp
LD HD LD HD
132 132 160 160
200 200 250 250
160 160 200 200
43h 44h
41h 42h
260 260 315 315
286 390 347 473
240 240 302 302
264 360 332 453
180 180 218 218
191 191 241 241
208 208 262 262
251 251 304 304
231 231 291 291
400 550
2923 3770 3093 4116
2089 3628 2872 3569
0.98
0-590 Hz
110 (230)
±
15% (tolerance relates to variety in voltage and cable conditions.) These
300 hp 350 hp
LD HD LD HD
200 200 250 250
300 300 350 350
250 250 315 315
44h 44h
42h 42h
395 395 480 480
435 593 528 720
361 361 443 443
397 542 487 665
274 274 333 333
288 288 353 353
313 313 384 384
381 381 463 463
348 348 427 427
2x185 (2x350 mcm)
630 800
4039 5137 5005 6674
3575 4566 4458 5714
125 (275)
80 (176)
LD
315
450
355
588
647
535
588
407
426
463
567
516
13 13
119