Using Web Site Security Certificates; Creating Self-Signed Certificates; Using Self-Signed Certificates With Internet Explorer 7 - ABB COM600 series User Manual

1MRS756125
7.3.
7.3.1.
7.3.2.
COM600 series, version 4.1
User's Manual
•
number of clients supported by the license.
• if WebHMI is enabled.
To update the license with a new set of protocols, order a new license from ABB and
update it to COM600 with SAB600.
To update the license:
1. Open the Management tool from the Gateway object in SAB600.
2. Click Update License.
3. Browse for the new license file and click Open.
The license is COM600 specific and the COM600 computer verifies the compatibility
of the license. Also the servers and clients verify the license.

Using web site security certificates

Creating self-signed certificates

By default, COM600 has a certificate tied to the factory default
computer name. You must create a self-signed certificate only
if the id of the COM600 computer changes.
To create a self-signed certificate:
1. In the COM600 computer, select Start > Control Panel > System > Computer
Name.
2. Change the computer name by clicking Change and by typing the new name in the
Computer Name Changes dialog.
Do not use the underscore character '_' in the computer
name.
3. In the COM600 computer, open the command prompt and go to directory
Files\IIS Resources\SelfSSL
4. Create and install a new certificate with command
5. Add the COM600 computer to the same domain as the client computer (in the
Computer Name Changes dialog), or add the COM600 computer information to the
client computer hosts file (

Using self-signed certificates with Internet Explorer 7

To use a self-signed certificate with Internet Explorer (IE) 7:
1. Export the certificate from the COM600 computer.
(...\system32\drivers\etc\hosts
C:\Program
selfssl /T /V:36500 /Q
).
91