Security Event List Backup - ABB COM600 series User Manual

6.12.
88
COM600 series, version 4.1
User's Manual
Levels columns, although the values are set according to the values defined for the
data object.
4. You can modify the editable values. Check the values for the History Levels column
from COM600 Data Historian Operator's Manual.
5. Select the desired signals for the configuration with the checkboxes in the Selected
column. With Select and Unselect you can select or unselect multiple rows at the
same time.
6. Save the configuration in the SAB600 project by clicking Apply.
The configuration is activated to COM600 as described in 7.1, Activating COM600 with
new configurations.

Security event list backup

You can take a backup of the COM600 Security event list either manually using a bat
file or automatically by setting the Windows task scheduler to take an automatic backup
at certain intervals.
You can take a manual backup by using the COM600EventStoreBackup.bat script.
The script is located at C:\Program Files\COM610 GW SW\Common\bin folder in
the COM600 computer.
Note that you need admin rights to the computer run the script and perform the backup
successfully.
The script takes an input parameter, which indicates the folder of which the backup is
taken. When the input is valid, the script copies all the security event list files to the
intended backup location.
The source folder for the security event list files is specified in the gwConfig.ini file
located at C:\Program Files\COM610 GW SW\Common\bin.
To take a manual backup of a COM600 Security event list:
1. Log into COM600 computer operating system.
2. Open command prompt as an administrator by choosing Start/>Run/>Cmd.
3. Change the runtime directory to C:\Program Files\COM610 GW SW\Com-
mon\bin., like for example, cd "C:\Program Files\COM610 GW SW\Com-
mon\bin"
4. Launch the COM600EventStoreBackup.bat script and specify the intended backup
location. For example, COM600EventStoreBackup.bat "C:\COM600_Secur-
ity_Events_Backup" .
5. Wait until the backup script is finished.
6. Close the command prompt window.
To make the backup automatic, you can set the Windows task scheduler to automatically
perform the backup function at certain intervals.
1MRS756125