System Consistency Check - ABB COM600 series User Manual

1MRS756125
6.4.2.7.
COM600 series, version 4.1
User's Manual
Figure 6.4.2.6-8 Summary Table Template
You can use the Summary Table Template to set predefined summary tables for
IEDs in Substation and Bay objects.
• If you want to use the Summary Table template when importing the IEDs, select
the Use Template checkbox.
• Templates stored in C:\PCMDataBases\COM600\TemplateManager are
shown in the tree view on the left side of the Configure Summary Table Tem-
plate page. You can move the templates under the chosen Substation or Bay
object by using the arrow buttons. When you select a template that you have
moved, you will see the IEDs under that object.
• You can create Summary Table templates by using the Summary Table Con-
figuration Tool under the Substation and Bay objects.
2. Click Import to import the selected file.
The new preconfigured objects appear in the object tree. If the configuration file is large,
the import may take some time.

System Consistency Check

System Consistency Check is intended to be used with IEC 61850 protocol to check that
the IED configurations currently used in the COM600 project are consistent with the
compared IED configurations. According to the IEC61850 standard, IEDs can have two
configuration revisions: one for data model and one for reporting. Configuration revision
SCLImport_SSTTemplate.png
63