Configuring Data Historian Measurements And Signals - ABB COM600 series User Manual

6.11.2.
86
COM600 series, version 4.1
User's Manual
Figure 6.11.1-2 Data Historian menu item shown in Web HMI
To enable the Vtrin installation to client computers, select Start -> All Programs ->
Data Historian -> Change Vtrin IP Address from the COM600 computer start menu.
If the IP address of the COM600 computer is changed, change
the Vtrin IP Address again.

Configuring Data Historian measurements and signals

In Data historian configuration measurements and signals from devices are selected for
history information. The trends can then be investigated in COM600 HMI. The function
includes several configuration parameters.
To configure Data historian:
1. Right-click the Gateway object and select Data Historian Configuration from the
shortcut menu.
1MRS756125
HMI_Data_Historian_menu.bmp