Pmu Aggregator 1; Volts Per Hertz; Restricted Ground Fault; Transducer Inputs And Outputs - GE T60 Instruction Manual

6.3 METERING
PATH: ACTUAL VALUES
 PMU AGGREGATOR 1

Actual values for the IEC 61850-90-5 PDU size are provided. These values allow you to know the approximate Ethernet
frame size for the data streams from each aggregator. This can help to estimate network loading. The PDU size shown in
the displays does not include the Ethernet, UDP, or IP layers. PDU sizes approaching approximately 1500 bytes result in
fragmented data frames, causing increased network traffic.
PATH: ACTUAL VALUES
 VOLTS PER HERTZ 1

The volts per hertz actual values are displayed in this menu.
PATH: ACTUAL VALUES
 RESTRICTED
 GROUND FAULT 1
The differential and restraint current values for the restricted ground fault element are displayed in this menu.
6
PATH: ACTUAL VALUES
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
6-26
 
METERING PHASOR MEASUREMENT UNIT

PMU AGGREGATOR 1

PDU SIZE: 0
 
METERING

VOLTS PER HERTZ 1(2)

VOLTS PER HERTZ 1:
0.000 pu
 
METERING RESTRICTED GROUND FAULT CURRENTS
RGF 1 DIFF
0.000
RGF 1 RESTR Igr:
MESSAGE
0.000
 
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
 
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
T60 Transformer Protection System

PMU AGGREGATOR 1

Igd:
A
A

6.3.12 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6 ACTUAL VALUES
6.3.9 PMU AGGREGATOR
6.3.10 VOLTS PER HERTZ

6.3.11 RESTRICTED GROUND FAULT

RESTRICTED GROUND FAULT 1(6)
GE Multilin