Register The License - Mitsubishi Electric AG-150A Instruction Book

* If the Time Master/Sub setting for the given unit is set to "Sub," temporarily set the setting to "Master," set the clock, and then set the
Master/Sub setting back to "Sub."

7-4 Register the license

License number
input button
This section describes how to register the license for the optional functions. Touch [Initial Settings] on the menu bar in the setting change
screen, and then touch [License] in the sub menu to bring up the license registration screen.
Select the optional functions to be used by touching the [Selecting Optional Function] button, touch the [License number input button],
and enter the license number. The optional functions will be added if the entered registration number matches the registered number
when [Register the license] is touched. The "Current Status" is changed to "Available".
If this fails, check that the license number is entered correctly, that the selection of the optional functions are made properly, and that the
time/date settings on AG-150A is set correctly.
Consult your dealer for the availability of optional functions and for how to purchase the license for them.
Touch the "Trial" button to register a one-day license that is valid for one day from the time the button is touched. (Web Monitor License
Only)
Note: When multiple AG-150A controllers are connected by connecting an Expansion controller to the system, the license to use the
optional functions is required only for the AG-150A controller on which the functions are actually used.
– 57 –
Trial button
Selecting Optional
Function button
Register the
license button