Register The License - Mitsubishi Electric AG-150A Instruction Book

* If the Master/Sub clock setting for the given unit is set to "Sub," temporarily set the setting to "Master," set the clock, and then set the
Master/Sub setting back to "Sub."

7-4 Register the license

License number
input button
This section describes how to register the license for the optional functions. Touch [Initial Settings] on the menu bar in the setting change
window, and then touch [License] in the sub menu to bring up the license registration screen.
Select the optional functions to be used by touching the [Selecting Optional Function] button, touch the [License number input button],
and enter the license number. The optional functions will be added if the entered registration number matches the registered number
when [Register the license] is touched.
If this fails, check that the license number is entered correctly, that the selection of the optional functions are made properly, and that the
time/date settings on AG-150A is set correctly.
Consult your dealer for the availability of optional functions and for how to purchase the license for them.
Touch the "Trial" button to register a one-day license that is valid for one day from the time the button is touched. (Web Monitor License
Only)
Note: When multiple AG-150A controllers are connected by connecting an expansion controller to the system, the license to use the
optional functions is required only for the AG-150A controller on which the functions are actually used.
– 52 –
Trial button
Selecting Optional
Function button
Register the
license button