8-1-3
Setting the AI controller (PAC-YG63MCA) settings
Main menu
Sub menu
Unit address
(1) Enter Sensor
name button
(2) Sensor type
selection button
Current sensor
reading
(1) Entering the sensor name
Press the [Enter Sensor Name] button to call up an on-screen keypad, and enter the sensor name in 20 characters or less (regardless of
whether single-byte or two-byte characters are used).
* The following symbols cannot be used for the sensor name: <, >, &, ", and '.
Measurement
range
– 83 –
(3) High/Low alarm
thresholds setting
Correction value
(4) Save Settings
button