Mitsubishi Electric AG-150A Instruction Book page 103

11-4-2 Power consumption data
The format of the CSV file that is output when the power consumption data is saved is as follows:
Note: Dates in the folder name, the file name,and the file contents are displayed in the format selected on the Unit Info screen.
"March 10, 2010" would be expressed
as [10/03/2010] in the [dd/mm/yyyy] format,
as [03/10/2010] in the [mm/dd/yyyy] format, and
as [2010/03/10] in the [yyyy/mm/dd] format.
[File name]
• Without connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]MCPA[PI controller*
(yyyy: year, mm: month, dd: date)
Example) ChargeParameter_2010-03-10MCPA50-3.csv
• With connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]MCPA[Expansion Controller Number(1-3)]-[PI controller*
2
(1-5)* ].csv (yyyy: year,mm: month,dd: date)
Example) ChargeParameter_2010-03-10MCPA1-50-3.csv
1
* PI controller : PAC-YG60MCA
2
* Time Periods 1 through 5 can only be set from TG-2000A.
When shipped from the factory, only Time Period 1 is settable.
[File contents]
The format of each CSV file is as follows. Each file contains up to 62 days of data.
* Delimiter ("," or ";") and decimal point ("." or ",") that are used by the CSV file are selected on the Initial Setting Web.
Item
1st line
2nd line
3rd line
4th line
5th to 66th line
(max.)
* No. is consisted of three-digit or four-digit number:
Without connection to an Expansion controller : address (two digits) and Time zone (one digit).
With connection to an Expansion controller : number(1-3) , address (two digits) and Time zone (one digit).
* Power consumption data range is 0.00 through 999999.99. If the count value exceeds the maximum value, the count value goes back to 0.00.
* The file is not output until the operation starts because the data does not exist.
* When the Energy Management License Pack or Charge License has not been registered, the file is not output.
* Charge License can be registered only on AG-150A-A.
Example) Without connection to an Expansion controller
202
10/03/2010-12/03/2010
MCP 50-3
No.,Date,Count value(Ch1), Count value(Ch2), Count value(Ch3), Count value(Ch4)
503,2010/03/10,100000.00,0.00,0.00,0.00
503,2010/03/11,100100.00,0.00,0.00,0.00
503,2010/03/12,100250.00,0.00,0.00,0.00
Example) With connection to an Expansion controller
202
10/03/2010-12/03/2010
MCP 1-50-3
No.,Date,Count value(Ch1), Count value(Ch2), Count value(Ch3), Count value(Ch4)
1503,2010/03/10,100000.00,0.00,0.00,0.00
1503,2010/03/11,100100.00,0.00,0.00,0.00
1503,2010/03/12,100250.00,0.00,0.00,0.00
File class Power consumption: 202
Data range Start date + "-" + End date
Without connection to an Expansion controller
"MCP"+[ PI controller address]-[Time zone]
Target trend
With connection to an Expansion controller
"MCP"+[Expansion Controller Number]+[ PI controller address]-[Time zone]
Item "No., Date, Count value(Ch1), Count value(Ch2), Count value(Ch3) ,Count value(Ch4)"
no., date, count value(Ch1), count value(Ch2), count value(Ch3) ,count value(Ch4)
Data
* The value for each data type is a cumulative value since the beginning of operation.
1
address (fixed 2 digits)]-[Time zone (1-5)*
Format
– 102 –
2
].csv
1
address (fixed 2 digits)]-[Time zone