Table of Contents
Advertisement
2.2.2
General Registers
Figure 2.3 shows the relationship between the processor modes and general registers. The SH7750
has twenty-four 32-bit general registers (R0_BANK0–R7_BANK0, R0_BANK1–R7_BANK1,
and R8–R15). However, only 16 of these can be accessed as general registers R0–R15 in one
processor mode. The SH7750 has two processor modes, user mode and privileged mode, in which
R0–R7 are assigned as shown below.
• R0_BANK0–R7_BANK0
In user mode (SR.MD = 0), R0–R7 are always assigned to R0_BANK0–R7_BANK0.
In privileged mode (SR.MD = 1), R0–R7 are assigned to R0_BANK0–R7_BANK0 only when
SR.RB = 0.
• R0_BANK1–R7_BANK1
In user mode, R0_BANK1–R7_BANK1 cannot be accessed.
In privileged mode, R0–R7 are assigned to R0_BANK1–R7_BANK1 only when SR.RB = 1.
Rev. 2.0, 03/98, page 13 of 396
Advertisement
Table of Contents
