Setting Port Numbers
Depending on your network environment, you can change the port number for each
protocol.
IMPORTANT
• <SMTP Receive>, <POP3 Receive>, <FTP Sending>, and <SMTP Sending> are
available only when the Send function (optional for the imageRUNNER 2545/2535/
2530/2525/2520) is activated.
3
• Changes made to Port Number Settings become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
NOTE
The default settings are as follows:
- LPD: 515
- RAW: 9100
- HTTP: 80
- SMTP Receive: 25
- POP3 Receive: 110
- FTP Sending: 21
- SMTP Sending: 25
- SNMP: 161
- WSD: 3702
- HTTPS: 443
1
3-38
Setting Port Numbers
Press
(Additional Functions)
➞ [System Settings] ➞ [Network
Settings].