Specifying The Machine's Ip Address; Setting Ipv4 Address - Canon imageRUNNER 2545i System Settings Manual

Specifying the Machine's IP Address

Before specifying the machine's protocol settings, you must assign the machine an
IP address to enable communication between the machine and computers.
IMPORTANT
• Before you perform the operations described in this section, make sure that the
machine is turned ON and physically connected to the network.
• If you are configuring the settings for the first time, use the machine's control panel.
After configuring the settings, you can change them using the Remote UI. For more
information on Remote UI, see "Managing the Machine," on p. 9-11.
• Changes made to IP Address Settings become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
• Functions that communicate with external servers on the internet may not be able to
access them due to firewall settings, etc. In this case, consult your network
administrator.
NOTE
For instructions on how to enter characters using the on-screen keyboard, see
Chapter 2, "Basic Operations," in the Reference Guide.

Setting IPv4 Address

This section describes how to set the IPv4 address from the control panel. After
configuring the TCP/IPv4 settings, make sure that the network connections are
properly set. (See "Checking the Network Connection," on p. 2-22.)
NOTE
'DHCP' is selected as default.

Specifying the Machine's IP Address

2
2-15