4
Specify the mail server for sending e-mails/I-faxes.
NOTE
If the screen <[Network Settings] Effective after ON/OFF> is displayed at this point,
press [ ] or [ ] until [E-mail/I-Fax] appears ➞ press [E-mail/I-fax], and proceed to the
steps below.
❑
Press [Next].
❑
Press [On] for <Allow SSL (POP)> ➞
press [OK].
IMPORTANT
• If the POP server does not support
encryption, the data will not be
encrypted, even if [On] is selected for
<Allow SSL (POP)>.
• To receive SSL-encrypted data using
POP, changing the port number for
<POP3 Receive> may be required.
(See "Setting Port Numbers," on
p. 3-38.) The proper port number
differs depending on your network
environment. For details, consult your
network administrator or e-mail
service provider.
❑
Proceed to step 4 to specify the settings
for sending e-mails/I-faxes.
Setting up E-Mail/I-Fax Function
3
3-57