Setting the Default Key for SSL Communications
Follow the procedure below to set the default key for SSL communications.
IMPORTANT
• Before you start setting the default key for SSL communications, make sure to perform
the following:
- Generate an SSL key pair. (See "Generating a Key Pair for SSL Communications," on
p. 3-21.)
- Access the E-mail/I-Fax settings and make sure that the SSL settings for POP and
SMTP are set to 'Off'. (See "Setting up E-Mail/I-Fax Function," on p. 3-52.)
- Access the Remote UI On/Off settings and make sure that the Use SSL setting is set
to 'Off'. (See "Restricting the Use of Remote UI," on p. 6-34.)
• Changes made to SSL Settings become effective when the machine is restarted. To
restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For
instructions on how to turn the machine ON and OFF, see Chapter 2, "Before You Start
Using the Machine," in the User's Guide.
1
2
Press
(Additional Functions)
➞ [System Settings] ➞ [Network
Settings].
Press [TCP/IP Settings].
Setting the Default Key for SSL Communications
3
3-35