Canon imageRUNNER 2545i System Settings Manual page 145

4
4
IMPORTANT
Since there is no way to check a stored password, make sure that you write it down,
and keep it in a safe place.
NOTE
If you make a mistake when entering the password, press
correct password.
5
Specify the memory lock settings.
● If you want to print the reports which are set to be printed automatically
in Report Settings:
4-10
Specifying Communications Settings
If you want to set a password for
the Memory Lock mode, enter a
password using
keys) ➞ press [Next].
If you do not want to set the Memory Lock
with a password, press [Next] without
entering any number.
Once the Memory Lock password is set, it
is necessary to enter the password when
you want to change the Memory Lock
Settings, except when you have logged in
to the machine by entering the System
Manager ID and System Password.
You cannot store a password that only
consists of zeros, such as <0000000>.
If you enter fewer than seven digits, the
machine stores the password with leading
zeros.
Example: If <02> or <002> is entered,
<0000002> is stored.
(Clear) ➞ enter the
❑
Press [On] for <Report Print>.
If you do not want to print these reports,
press [Off].
- (numeric