Setting Sntp; Setting Sntp Server Settings - Canon imageRUNNER 2545i System Settings Manual

Setting SNTP

SNTP (Simple Network Time Protocol) enables the machine to synchronize its
system times with public time servers located around the world. The time provided
by public NTP servers is generally accurate to within milliseconds.

Setting SNTP Server Settings

IMPORTANT
• In order to perform time synchronization through SNTP, it is necessary to set the time
zone of the region in which you are using the machine in advance. For instructions on
how to set the time zone, see Chapter 3, "Configuring the Machine's Basic Settings," in
the Reference Guide.
• Changes made to SNTP Settings become effective when the machine is restarted. To
restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For
instructions on how to turn the machine ON and OFF, see Chapter 2, "Before You Start
Using the Machine," in the User's Guide.
• IPv6 is not supported.
NOTE
• Time synchronization is not performed during two hours before and after the selected
start and end dates of the daylight saving time settings.
• The default setting is 'Off'.
1
Press (Additional Functions)
➞ [System Settings] ➞ [Network
Settings].

Setting SNTP

3
3-13