Canon imageRUNNER 2545i System Settings Manual page 296

Item
E-mail/I-Fax
SMTP Receive
POP
Authentication/
Encryption
SMTP Server
E-mail Address
POP Server
POP Address
POP Password
POP Interval
Startup Time Settings
Startup Time Settings
IEEE802.1X Settings
IEEE802.1X Settings
Settings
On, Off
On, Off
POP Authentication before Send: On, Off
SMTP Authentication (SMTP AUTH): On, Off
Disp Auth Screen When Sending*
Carry Over Authentication*
User: User name for SMTP authentication (64
Characters maximum)
Password: Password for SMTP authentication (32
Characters maximum)
Allow SSL (POP): On, Off
Allow SSL (SMTP Send): On, Off
Allow SSL (SMTP Receive): SSL, On, Off
The settings to verify the SSL server certificates
for POP/SMTP are available on the Remote UI.
See Chapter 4, "Customizing Settings," in the
Remote UI Guide.
Server name or IP address (47 Characters
maximum)
64 Characters maximum
Server name or IP address (47 Characters
maximum)
32 Characters maximum
32 Characters maximum
0 (Off) to 99
0 to 300 seconds, 0 sec(s)
On, Off
Login Name: 24 characters maximum
Use TLS: On, Off
Key and Cert.: Select the default key and
certificate from the list
Use TTLS: On, Off
TTLS Internal Protocol: MSCHAPv2, PAP
Use PEAP: On, Off
User: 24 characters maximum
Password: 24 characters maximum
Login Name as User Name: On, Off
4
: On, Off
4 : On, Off
System Setting Items
Applicable
Page
p. 3-52
9
p. 7-3
p. 2-10
9-7