Setting The Use Of Http - Canon imageRUNNER 2545i System Settings Manual
Hide thumbs
Also See for imageRUNNER 2545i:
- Sending and facsimile manual (321 pages) ,
- Reference manual (264 pages) ,
- Printer manual (148 pages)
Table of Contents
Advertisement
Setting the Use of HTTP
You can enable or disable HTTP on the machine. HTTP is used for communicating
to a networked computer via the Remote UI.
IMPORTANT
Changes made to Use HTTP become effective when the machine is restarted. To
restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For
instructions on how to turn the machine ON and OFF, see Chapter 2, "Before You Start
Using the Machine," in the User's Guide.
NOTE
The default setting is 'On'.
1
2
Press
(Additional Functions)
➞ [System Settings] ➞ [Network
Settings].
Press [TCP/IP Settings].
Setting the Use of HTTP
3
3-33
Advertisement
Table of Contents
