4.USING N/W-FAX DRIVER (NETWORK FAX)
Click [Print] in the [Print] dialog box.
6
A fax is sent.
Note that the command name to print a document (send a fax) may differ from [Print]
depending on the application software.
A waiting fax job can be checked or deleted through the managing jobs function in TopAccess.
A sent fax job can also be checked through the displaying job logs function in TopAccess. For
details, refer to the TopAccess Guide.
When password entry is required
When the [Enter the user credentials manually] option is enabled on this equipment, you are prompted
to enter your user name and password before sending a fax.
When the dialog box appears, enter your user name and password, and then click [OK].
Up to 128 characters can be entered in the [User Name] box. Up to 64 characters in the [Password]
box.
The user name and password entered in the above boxes are not stored. Therefore, you must enter
your user name and password every time you send a fax.
If you want to change the settings of this option, carry it out on the [Device Settings] tab.
P.121 "Setting up the [Device Settings] tab"
Sending Network Faxes 99