3.USING THE FAX UNIT (USEFUL FUNCTIONS)
Specify the recipient to be registered, and then press [OK].
5
P.39 "Specifying the recipient"
Specify the recipient from the address book because this cannot be done with direct dialing.
The confirmation screen for sending a relay transmission report is displayed. If you
6
want to send the report, select [Yes]. If not, select [No].
By default, the relay transmission end terminal report is sent when a communication error occurs.
On the Admin menu, you can make setting so that the report can be sent automatically. For
details of the operation, refer to the MFP Management Guide.
76 Using the Mailbox Function