2.USING THE FAX UNIT (BASIC OPERATION)
Changing the settings for each page
You can change the scanning conditions (Resolution, Mode, Exposure, and Original) for each page.
Specify the recipients and press [Send] to start scanning a document. When the
1
scanning of the original is completed, the confirmation screen for the next original
is displayed. Press [Option].
The screen above is displayed when the original placed on the original glass. If you place an
original on the ADF and press [Continue] during scanning, the confirmation screen for the next
original is displayed after the scanning is completed. If you press [Stop] displayed on the screen
during scanning, it will be halted and the confirmation screen for the next original can be
displayed.
2
The setting screen for the scanning conditions is displayed. Change the settings, and
then press [OK].
P.35 "Setting other transmission conditions"
38 Operating the Fax unit