Toshiba GD-1370 Fax Manual page 31

2.USING THE FAX UNIT (BASIC OPERATION)
Specify the recipient.
4
There are multiple methods to specify the recipients. For details, see the following page.
 P.39 "Specifying the recipient"
To display the preview screen, press [Preview].
 P.45 "Displaying the preview"
Press [Send].
5
The fax is sent or reserved.
 Alternatively, you can press the [START] button on the control panel to send a fax.
 In the memory transmission mode, the original is scanned into memory. Once a connection has
been made, this equipment automatically starts sending the scanned document. In the direct
transmission mode, the fax number is dialed immediately, and the scanned document will be
sent. (Transmission conditions can be set in the transmission condition setting screen.)
 If memory becomes full during scanning in the memory transmission mode, that original will
not be stored in memory. When that happens, reduce the number of originals you are sending,
or try sending them in the direct transmission mode.
 You can check the status of the current sending. You can also cancel the transmission (deletes
the job).
 P.54 "Checking Communication Status"
 P.57 "Canceling the Transmission"
Operating the Fax unit 31