Toshiba GD-1370 Fax Manual page 115

4.USING N/W-FAX DRIVER (NETWORK FAX)
2. To
This displays the specified recipients list.
 P.101 "Specifying Recipients of Network Faxes"
3. [Remove]
Select a recipient in the [To] list and click this to remove the recipient from the list.
 P.111 "Removing recipients"
4. Fax Number
Enter the recipient's fax number directly.
 P.101 "Entering recipients from the keyboard"
5. [SUB/PWD]
Click this to display the [SUB/PWD] dialog box. You can add a sub address and a password to the
entered fax number.
 P.101 "Entering recipients from the keyboard"
6. Internet Fax Address
Enter the recipient's Internet Fax number directly.
 P.101 "Entering recipients from the keyboard"
7. Resolution
Select the resolution for the fax.
- Standard (200 x 100 dpi) — Select this to send a document in Standard mode (200 x 100 dpi).
- Fine (200 x 200 dpi) — Select this to send a document in Fine mode (200 x 200 dpi).
- Super Fine (200 x 400 dpi) — Select this to send a document in Super Fine mode (200 x 400
dpi).
- Ultra Fine (400 x 400 dpi) — Select this to send a document in Ultra Fine mode (400 x 400 dpi).
8. Department Code
Enter a department code of 1 to 63 characters if required. When the department code is enabled
on the MFP, you must enter it to send a fax.
 If you do not enter a department code when it is enabled on the MFP the [Invalid Department
Code Print Job] is set to "Store to invalid job list" in TopAccess, the job will be stored in the
Invalid job list without being transmitted. You can print or delete a stored job from the [Job
Status] on the touch panel.
 If you do not enter the department code when the department code is enabled on the MFP and
the [Invalid Department Code Print Job] is set to PRINT in TopAccess, the job will be sent.
 If you do not enter the department code when the department code is enabled on the MFP and
the [Invalid Department Code Print Job] is set to DELETE in TopAccess, the job will be deleted
automatically.
9. Hide Department Code
Select this check box to display a department code in the blank symbols.
10. Cover Sheet
Select a cover sheet type among [Standard Cover Page], [Business Cover Page] and [Professional
Cover Page] if you want to attach a cover sheet to the first page of the document.
 P.127 "Sending with a cover sheet"
Setting up the N/W-Fax Driver Options 115