Toshiba GD-1370 Fax Manual page 28

2.USING THE FAX UNIT (BASIC OPERATION)
Sending different size originals
To set different width originals, adjust the side guides to the widest original size, and then align the
original against the front side. Available combinations of the original size are as follows.
 A/B format: A3, A4, B4, B5, A4-R, FOLIO
 North American format: LD, LT, COMP, LG, LT-R
To send different width originals, you need to enable "Different Width" as a transmission condition.
 P.33 "Setting the transmission conditions"
Notes for using the ADF
Do not use the following types of original as they may cause a paper misfeed or damage to the
equipment:
1. Originals that are folded or curled
2. Originals with carbon copies
3. Originals that have been taped, pasted, or cut-out
4. Originals with multiple holes punched (e.g. loose leaf paper)
5. Originals that have been clipped or stapled
6. Originals with holes or tears
7. Originals that are damp
8. Originals whose correction fluid or ink has not been dried completely
9. Overhead transparencies or tracing paper
10. Coated paper (e.g. coated with wax)
11. India paper (used for dictionaries, bibles, etc.)
28 Operating the Fax unit